Apr 6
Calibration and Onscreen Menu Issues
Hello
It is my understanding for those of us who wish to calibrate the Titan Noir models that the onscreen menu plays havoc with calibration, that it needs to be constantly disengaged every time you change the value, then you measure and must engage the menu system again, this is slow and ponderous, not very nice and will take people much longer if they wish to calibrate their projector.
Can you possibly fix this issue so people can adjust the menu position when calibrating and make sure the menu does not interfere in the calibration readings, thank you.
Completed
But it does not feature 0.8 delta error accuracy, testers measure much more deviation than this and the advertising claims 0.8 delta error accuracy, therefore to get below 3 delta error, the point at which we do not notice inaccurate greyscale and colours, we need to use the inbuilt calibration tools, but as said above, as tested by people, the onscreen menu system interferes with the calibration process and must be disabled and enabled constantly resulting in much time being wasted. If you truly can get the delta errors down to under 3 in one mode for BT709, BT2020, P3 and for 3D then we wouldn’t need to use the calibration features.